Product Description

Mounted bearings and housings with rolling bearings support a rotating shaft, which can be bolted on a device body or any other substructure. There is no require to specifically device a bearing housing in a bordering casing. This makes these remedies value-effective and effortless to use, even though supplying entire rolling bearing functionality.

 

Unit No.                             Dimension      mm         Bolt Size  Bearing No. Housing No. Weight (kg)
            in.         mm 
d h a e b s1 s2 g w B n inch
SS-UCP201 12 30.2 127 95 38 13 19 14 62 31 twelve.seven M10 SS-UC201 SP203 .sixty nine
SS-UCP201-eight .five 1-3/six five three-3/four one-1/two one/two 3/4 nine/sixteen two-7/sixteen 1.2205 .five 3/8 SS-UC201-eight .sixty nine
SS-UCP202 15 30.2 127 95 38 13 19 fourteen 62 31 12.seven M10 SS-UC202 SP203 .sixty nine
SS-UCP202-nine 9/16 1-3/sixteen 5 3-3/four 1-1/two 1/2 3/4 9/16 2-7/sixteen 1.2205 0.5 3/8 SS-UC202-nine .69
SS-UCP202-10 five/eight SS-UC202-ten .69
SS-UCP203 17 30.two 127 ninety five 38 13 19 fourteen sixty two 31 12.7 M10 SS-UC203 SP203 .68
SS-UCP203-11 eleven/sixteen one-3/16 5 three-3/four 1-1/2 1/two 3/4 nine/sixteen 2-7/sixteen one.2205 .5 three/eight SS-UC203-eleven .67
SS-UCP204 twenty 33.3 127 95 38 thirteen 19 fourteen 65 31 12.seven M10 SS-UC204 SP204 .sixty six
SS-UCP204-twelve three/four one-5/sixteen 5 three-3/four one-1/2 one/two three/four 9/sixteen 2-9/16 1.2205 .5 three/eight SS-UC204-12 .sixty six
SS-UCP205 25 36.5 140 one hundred and five 38 thirteen 19 fifteen seventy one 34.1 14.3 M10 SS-UC205 SP205 .eighty one
SS-UCP205-13 13/sixteen 1-7/sixteen 5-1/two 4-1/eight 1-1/2 1/two 3/4 19/32 2-25/32 1.3425 0.563 3/8 SS-UC205-13 .eighty five
SS-UCP205-fourteen seven/eight SS-UC205-fourteen .83
SS-UCP205-fifteen fifteen/sixteen SS-UC205-fifteen .82
SS-UCP205-16 1 SS-UC205-16 .81
SS-UCP206 thirty forty two.nine 165 121 48 17 twenty 17 84 38.one 15.nine M14 SS-UC206 SP206 1.24
SS-UCP206-17 one-1/sixteen 1-11/16 6-1/2 4-3/four 1-7/8 43/sixty four 25/32 21/32 3-5/16 1. 0.626 1/two SS-UC206-17 1.27
SS-UCP206-eighteen 1-1/8 SS-UC206-eighteen 1.26
SS-UCP206-19 one-3/16 SS-UC206-19 one.24
SS-UCP206-20 one-1/4 SS-UC206-20 1.23
SS-UCP207 35 forty seven.six 167 127 forty eight 17 20 18 93 42.9 17.five M14 SS-UC207 SP207 one.fifty eight
SS-UCP207-twenty one-1/four 1-7/eight 6-9/sixteen 5 1-7/eight 43/64 25/32 45/64 3-21/32 1.689 1.689 1/two SS-UC207-twenty 1.64
SS-UCP207-21 1-5/16 SS-UC207-21 one.61
SS-UCP207-22 one-3/eight SS-UC207-22 1.fifty eight
SS-UCP207-23 1-7/sixteen SS-UC207-23 1.55
SS-UCP208 forty 49.2 184 137 54 17 20 eighteen one hundred forty nine.two 19 M14 SS-UC208 SP208 one.89
SS-UCP208-24 one-1/12 1-15/sixteen 7-1/4 5-13/32 2-1/eight 43/64 25/32 45/sixty four 3-fifteen/16 1.937 0.748 1/2 SS-UC208-24 one.ninety three
SS-UCP208-25 1-9/16 SS-UC208-twenty five 1.9
SS-UCP209 45 fifty four a hundred ninety 146 fifty four seventeen 20 twenty 106 49.two 19 M14 SS-UC209 SP209 two.14
SS-UCP209-26 one-8/8 2-1/eight 7-15/32 5-3/four 2-1/8 43/64 25/32 25/32 4-eleven/sixty four 1.937 0.748 1/2 SS-UC209-26 two.24
SS-UCP209-27 1-eleven/sixteen SS-UC209-27 2.two
SS-UCP209-28 one-3/4 SS-UC209-28 two.fourteen
SS-UCP210 fifty fifty seven.2 206 159 sixty 20 23 21 113 fifty one.six 19 M16 SS-UC210 SP210 2.66
SS-UCP210-29 1-13/16 2-1/four 8-1/eight 6-1/4 2-3/8 25/32 29/32 53/sixty four 4-29/sixty four 2.571 0.748 5/eight SS-UC210-29 two.seventy eight
SS-UCP210-thirty one-7/eight SS-UC210-30 two.73
SS-UCP210-31 one-fifteen/16 SS-UC210-31 2.sixty eight
SS-UCP210-32 2 SS-UC210-32 2.sixty four
SS-UCP211 fifty five sixty three.five 219 171 60 20 23 23 one hundred twenty five fifty five.6 22.two M16 SS-UC211 SP211 3.31
SS-UCP211-32 two 2-1/2 8-5/8 6-47/sixty four 2-3/8 25/32 29/32 29/32 4-59/sixty four 2.189 0.874 5/8 SS-UC211-32 3.46
SS-UCP211-33 two-1/16 SS-UC211-33 3.4
SS-UCP211-34 2-1/eight SS-UC211-34 3.35
SS-UCP211-35 two-3/sixteen SS-UC211-35 3.29
SS-UCP212 60 69.8 241 184 70 20 23 25 138 sixty five.1 twenty five.4 M16 SS-UC212 SP212 4.nine
SS-UCP212-36 2-1/four 2-3/four 9-1/2 7-1/4 2-3/4 25/32 29/32 63/sixty four 5-7/sixteen 2.563 1 5/eight SS-UC212-36 5.03
SS-UCP212-37 2-5/sixteen SS-UC212-37 4.95
SS-UCP212-38 2-3/eight SS-UC212-38 four.88
SS-UCP212-39 2-7/16 SS-UC212-39 1.eighty one
SS-UCP213 sixty five 76.two 265 203 70 25 28 27 a hundred and fifty 65.1 25.4 M20 SS-UC213 SP213 five.fifteen
SS-UCP213-40 2-1/two 3 10-7/16 8 2-3/4 63/sixty four 1-3/32 1-1/16 5-29/32 2.563 1 3/four SS-UC213-40 five.24
SS-UCP213-forty one 2-9/sixteen SS-UC213-41 five.15
SS-UCP214 70 79.4 266 210 seventy two twenty five 28 27 156 seventy four.six thirty.two M20 SS-UC214 SP214 6.two
SS-UCP214-forty two two-5/8 3-1/8 10-15/32 8-seventeen/64 2-27/32 63/64 1-3/32 1-1/16 6-9/64 2.9370 1.189 3/four SS-UC214-42 6.forty one
SS-UCP214-43 two-eleven/16 SS-UC214-forty three six.31
SS-UCP214-forty four 2-3/four SS-UC214-forty four six.21

SAMPLES
one. Samples quantity: 1-10 PCS are accessible.
2. Free samples: It is dependent on the Product No., substance and amount. Some of the bearings samples need customer to pay out samples demand and shipping value.
3. It really is far better to start off your order with Trade Assurance to get entire protection for your samples buy.

Customized
The customized Logo or drawing is acceptable for us.

MOQ
one. MOQ: 10 PCS common bearings.
2. MOQ: a thousand PCS customized your model bearings.

OEM Coverage
1. We can printing your brand (emblem, artwork)on the shield or laser engraving your brand on the protect.
2. We can custom made your packaging according to your layout
3. All copyright personal by clientele and we promised don’t disclose any data.

Thank you really a lot for having time to see our company’s website. If you are interested in this merchandise, make sure you really feel free of charge to make contact with us. We are often here.

 

US $0.1-100
/ Set
|
1 Set

(Min. Order)

###

Shipping Cost:

Estimated freight per unit.



To be negotiated|


Freight Cost Calculator

###

Aligning: Aligning Bearing
Separated: Separated
Feature: Vacuum, Magnetically, Low Temperature, Corrosion Resistant, High Temperature, High Speed

###

Samples:
US$ 1/Set
1 Set(Min.Order)

|

Order Sample

###

Customization:

###

Unit No.                             Dimension      mm         Bolt Size  Bearing No. Housing No. Weight (kg)
            in.         mm 
d h a e b s1 s2 g w B n inch
SS-UCP201 12 30.2 127 95 38 13 19 14 62 31 12.7 M10 SS-UC201 SP203 0.69
SS-UCP201-8 0.5 1-3/6 5 3-3/4 1-1/2 1/2 3/4 9/16 2-7/16 1.2205 0.5 3/8 SS-UC201-8 0.69
SS-UCP202 15 30.2 127 95 38 13 19 14 62 31 12.7 M10 SS-UC202 SP203 0.69
SS-UCP202-9 9/16 1-3/16 5 3-3/4 1-1/2 1/2 3/4 9/16 2-7/16 1.2205 0.5 3/8 SS-UC202-9 0.69
SS-UCP202-10 5/8 SS-UC202-10 0.69
SS-UCP203 17 30.2 127 95 38 13 19 14 62 31 12.7 M10 SS-UC203 SP203 0.68
SS-UCP203-11 11/16 1-3/16 5 3-3/4 1-1/2 1/2 3/4 9/16 2-7/16 1.2205 0.5 3/8 SS-UC203-11 0.67
SS-UCP204 20 33.3 127 95 38 13 19 14 65 31 12.7 M10 SS-UC204 SP204 0.66
SS-UCP204-12 3/4 1-5/16 5 3-3/4 1-1/2 1/2 3/4 9/16 2-9/16 1.2205 0.5 3/8 SS-UC204-12 0.66
SS-UCP205 25 36.5 140 105 38 13 19 15 71 34.1 14.3 M10 SS-UC205 SP205 0.81
SS-UCP205-13 13/16 1-7/16 5-1/2 4-1/8 1-1/2 1/2 3/4 19/32 2-25/32 1.3425 0.563 3/8 SS-UC205-13 0.85
SS-UCP205-14 7/8 SS-UC205-14 0.83
SS-UCP205-15 15/16 SS-UC205-15 0.82
SS-UCP205-16 1 SS-UC205-16 0.81
SS-UCP206 30 42.9 165 121 48 17 20 17 84 38.1 15.9 M14 SS-UC206 SP206 1.24
SS-UCP206-17 1-1/16 1-11/16 6-1/2 4-3/4 1-7/8 43/64 25/32 21/32 3-5/16 1. 0.626 1/2 SS-UC206-17 1.27
SS-UCP206-18 1-1/8 SS-UC206-18 1.26
SS-UCP206-19 1-3/16 SS-UC206-19 1.24
SS-UCP206-20 1-1/4 SS-UC206-20 1.23
SS-UCP207 35 47.6 167 127 48 17 20 18 93 42.9 17.5 M14 SS-UC207 SP207 1.58
SS-UCP207-20 1-1/4 1-7/8 6-9/16 5 1-7/8 43/64 25/32 45/64 3-21/32 1.689 1.689 1/2 SS-UC207-20 1.64
SS-UCP207-21 1-5/16 SS-UC207-21 1.61
SS-UCP207-22 1-3/8 SS-UC207-22 1.58
SS-UCP207-23 1-7/16 SS-UC207-23 1.55
SS-UCP208 40 49.2 184 137 54 17 20 18 100 49.2 19 M14 SS-UC208 SP208 1.89
SS-UCP208-24 1-1/12 1-15/16 7-1/4 5-13/32 2-1/8 43/64 25/32 45/64 3-15/16 1.937 0.748 1/2 SS-UC208-24 1.93
SS-UCP208-25 1-9/16 SS-UC208-25 1.9
SS-UCP209 45 54 190 146 54 17 20 20 106 49.2 19 M14 SS-UC209 SP209 2.14
SS-UCP209-26 1-8/8 2-1/8 7-15/32 5-3/4 2-1/8 43/64 25/32 25/32 4-11/64 1.937 0.748 1/2 SS-UC209-26 2.24
SS-UCP209-27 1-11/16 SS-UC209-27 2.2
SS-UCP209-28 1-3/4 SS-UC209-28 2.14
SS-UCP210 50 57.2 206 159 60 20 23 21 113 51.6 19 M16 SS-UC210 SP210 2.66
SS-UCP210-29 1-13/16 2-1/4 8-1/8 6-1/4 2-3/8 25/32 29/32 53/64 4-29/64 2.0315 0.748 5/8 SS-UC210-29 2.78
SS-UCP210-30 1-7/8 SS-UC210-30 2.73
SS-UCP210-31 1-15/16 SS-UC210-31 2.68
SS-UCP210-32 2 SS-UC210-32 2.64
SS-UCP211 55 63.5 219 171 60 20 23 23 125 55.6 22.2 M16 SS-UC211 SP211 3.31
SS-UCP211-32 2 2-1/2 8-5/8 6-47/64 2-3/8 25/32 29/32 29/32 4-59/64 2.189 0.874 5/8 SS-UC211-32 3.46
SS-UCP211-33 2-1/16 SS-UC211-33 3.4
SS-UCP211-34 2-1/8 SS-UC211-34 3.35
SS-UCP211-35 2-3/16 SS-UC211-35 3.29
SS-UCP212 60 69.8 241 184 70 20 23 25 138 65.1 25.4 M16 SS-UC212 SP212 4.9
SS-UCP212-36 2-1/4 2-3/4 9-1/2 7-1/4 2-3/4 25/32 29/32 63/64 5-7/16 2.563 1 5/8 SS-UC212-36 5.03
SS-UCP212-37 2-5/16 SS-UC212-37 4.95
SS-UCP212-38 2-3/8 SS-UC212-38 4.88
SS-UCP212-39 2-7/16 SS-UC212-39 1.81
SS-UCP213 65 76.2 265 203 70 25 28 27 150 65.1 25.4 M20 SS-UC213 SP213 5.15
SS-UCP213-40 2-1/2 3 10-7/16 8 2-3/4 63/64 1-3/32 1-1/16 5-29/32 2.563 1 3/4 SS-UC213-40 5.24
SS-UCP213-41 2-9/16 SS-UC213-41 5.15
SS-UCP214 70 79.4 266 210 72 25 28 27 156 74.6 30.2 M20 SS-UC214 SP214 6.2
SS-UCP214-42 2-5/8 3-1/8 10-15/32 8-17/64 2-27/32 63/64 1-3/32 1-1/16 6-9/64 2.9370 1.189 3/4 SS-UC214-42 6.41
SS-UCP214-43 2-11/16 SS-UC214-43 6.31
SS-UCP214-44 2-3/4 SS-UC214-44 6.21
US $0.1-100
/ Set
|
1 Set

(Min. Order)

###

Shipping Cost:

Estimated freight per unit.



To be negotiated|


Freight Cost Calculator

###

Aligning: Aligning Bearing
Separated: Separated
Feature: Vacuum, Magnetically, Low Temperature, Corrosion Resistant, High Temperature, High Speed

###

Samples:
US$ 1/Set
1 Set(Min.Order)

|

Order Sample

###

Customization:

###

Unit No.                             Dimension      mm         Bolt Size  Bearing No. Housing No. Weight (kg)
            in.         mm 
d h a e b s1 s2 g w B n inch
SS-UCP201 12 30.2 127 95 38 13 19 14 62 31 12.7 M10 SS-UC201 SP203 0.69
SS-UCP201-8 0.5 1-3/6 5 3-3/4 1-1/2 1/2 3/4 9/16 2-7/16 1.2205 0.5 3/8 SS-UC201-8 0.69
SS-UCP202 15 30.2 127 95 38 13 19 14 62 31 12.7 M10 SS-UC202 SP203 0.69
SS-UCP202-9 9/16 1-3/16 5 3-3/4 1-1/2 1/2 3/4 9/16 2-7/16 1.2205 0.5 3/8 SS-UC202-9 0.69
SS-UCP202-10 5/8 SS-UC202-10 0.69
SS-UCP203 17 30.2 127 95 38 13 19 14 62 31 12.7 M10 SS-UC203 SP203 0.68
SS-UCP203-11 11/16 1-3/16 5 3-3/4 1-1/2 1/2 3/4 9/16 2-7/16 1.2205 0.5 3/8 SS-UC203-11 0.67
SS-UCP204 20 33.3 127 95 38 13 19 14 65 31 12.7 M10 SS-UC204 SP204 0.66
SS-UCP204-12 3/4 1-5/16 5 3-3/4 1-1/2 1/2 3/4 9/16 2-9/16 1.2205 0.5 3/8 SS-UC204-12 0.66
SS-UCP205 25 36.5 140 105 38 13 19 15 71 34.1 14.3 M10 SS-UC205 SP205 0.81
SS-UCP205-13 13/16 1-7/16 5-1/2 4-1/8 1-1/2 1/2 3/4 19/32 2-25/32 1.3425 0.563 3/8 SS-UC205-13 0.85
SS-UCP205-14 7/8 SS-UC205-14 0.83
SS-UCP205-15 15/16 SS-UC205-15 0.82
SS-UCP205-16 1 SS-UC205-16 0.81
SS-UCP206 30 42.9 165 121 48 17 20 17 84 38.1 15.9 M14 SS-UC206 SP206 1.24
SS-UCP206-17 1-1/16 1-11/16 6-1/2 4-3/4 1-7/8 43/64 25/32 21/32 3-5/16 1. 0.626 1/2 SS-UC206-17 1.27
SS-UCP206-18 1-1/8 SS-UC206-18 1.26
SS-UCP206-19 1-3/16 SS-UC206-19 1.24
SS-UCP206-20 1-1/4 SS-UC206-20 1.23
SS-UCP207 35 47.6 167 127 48 17 20 18 93 42.9 17.5 M14 SS-UC207 SP207 1.58
SS-UCP207-20 1-1/4 1-7/8 6-9/16 5 1-7/8 43/64 25/32 45/64 3-21/32 1.689 1.689 1/2 SS-UC207-20 1.64
SS-UCP207-21 1-5/16 SS-UC207-21 1.61
SS-UCP207-22 1-3/8 SS-UC207-22 1.58
SS-UCP207-23 1-7/16 SS-UC207-23 1.55
SS-UCP208 40 49.2 184 137 54 17 20 18 100 49.2 19 M14 SS-UC208 SP208 1.89
SS-UCP208-24 1-1/12 1-15/16 7-1/4 5-13/32 2-1/8 43/64 25/32 45/64 3-15/16 1.937 0.748 1/2 SS-UC208-24 1.93
SS-UCP208-25 1-9/16 SS-UC208-25 1.9
SS-UCP209 45 54 190 146 54 17 20 20 106 49.2 19 M14 SS-UC209 SP209 2.14
SS-UCP209-26 1-8/8 2-1/8 7-15/32 5-3/4 2-1/8 43/64 25/32 25/32 4-11/64 1.937 0.748 1/2 SS-UC209-26 2.24
SS-UCP209-27 1-11/16 SS-UC209-27 2.2
SS-UCP209-28 1-3/4 SS-UC209-28 2.14
SS-UCP210 50 57.2 206 159 60 20 23 21 113 51.6 19 M16 SS-UC210 SP210 2.66
SS-UCP210-29 1-13/16 2-1/4 8-1/8 6-1/4 2-3/8 25/32 29/32 53/64 4-29/64 2.0315 0.748 5/8 SS-UC210-29 2.78
SS-UCP210-30 1-7/8 SS-UC210-30 2.73
SS-UCP210-31 1-15/16 SS-UC210-31 2.68
SS-UCP210-32 2 SS-UC210-32 2.64
SS-UCP211 55 63.5 219 171 60 20 23 23 125 55.6 22.2 M16 SS-UC211 SP211 3.31
SS-UCP211-32 2 2-1/2 8-5/8 6-47/64 2-3/8 25/32 29/32 29/32 4-59/64 2.189 0.874 5/8 SS-UC211-32 3.46
SS-UCP211-33 2-1/16 SS-UC211-33 3.4
SS-UCP211-34 2-1/8 SS-UC211-34 3.35
SS-UCP211-35 2-3/16 SS-UC211-35 3.29
SS-UCP212 60 69.8 241 184 70 20 23 25 138 65.1 25.4 M16 SS-UC212 SP212 4.9
SS-UCP212-36 2-1/4 2-3/4 9-1/2 7-1/4 2-3/4 25/32 29/32 63/64 5-7/16 2.563 1 5/8 SS-UC212-36 5.03
SS-UCP212-37 2-5/16 SS-UC212-37 4.95
SS-UCP212-38 2-3/8 SS-UC212-38 4.88
SS-UCP212-39 2-7/16 SS-UC212-39 1.81
SS-UCP213 65 76.2 265 203 70 25 28 27 150 65.1 25.4 M20 SS-UC213 SP213 5.15
SS-UCP213-40 2-1/2 3 10-7/16 8 2-3/4 63/64 1-3/32 1-1/16 5-29/32 2.563 1 3/4 SS-UC213-40 5.24
SS-UCP213-41 2-9/16 SS-UC213-41 5.15
SS-UCP214 70 79.4 266 210 72 25 28 27 156 74.6 30.2 M20 SS-UC214 SP214 6.2
SS-UCP214-42 2-5/8 3-1/8 10-15/32 8-17/64 2-27/32 63/64 1-3/32 1-1/16 6-9/64 2.9370 1.189 3/4 SS-UC214-42 6.41
SS-UCP214-43 2-11/16 SS-UC214-43 6.31
SS-UCP214-44 2-3/4 SS-UC214-44 6.21

Types of Ball Bearings

There are many types of Ball Bearings available on the market, but which one is best for your application? Here, we will discuss the differences between Angular contact, Single-row, High-carbon steel, and Ceramic ball bearings. These types of bearings also feature races, or a groove in the center of each. These races are important in keeping the balls contained within the cylinder. They also provide a groove-baed pathway.
bearing

Ceramic

The ceramic ball used in ball bearings has many advantages. It is lightweight, operates at lower temperatures, has reduced skidding, and is resistant to electrolysis. The ball also exhibits longer fatigue life. All of these factors make the ceramic ball a good choice for many applications. But, how do you know if a ceramic ball bearing is right for your application? Read on to discover why ceramic ball bearings are a better choice than steel or stainless steel ones.
The ceramic balls are 40% more dense than steel. This means less centrifugal force is generated on the bearing, which suppresses heat generation. Because of this reduced friction, ceramic bearings are more efficient at transferring energy. Compared to steel bearings, ceramic balls have longer life spans. Nonetheless, these ceramic balls aren’t as strong as steel. Therefore, it is important to understand the limitations of the ceramic ball bearing before buying one.
The ceramic materials used for ball bearings are resistant to micro-welding. Metals undergo this process when imperfections in the surfaces interact. Eventually, this results in a brittle ball that reduces the life of a bearing. Unlike metals, ceramic materials have a stable behavior at high temperatures and exhibit less thermal expansion. This means that they can be used for applications where lubrication isn’t an option.
While steel balls can easily absorb contaminants and foreign particles, the ceramic ball is insensitive to this, and doesn’t require lubrication. This means they’re not susceptible to corrosion and other common problems. These are just a few reasons why ceramics are a better choice. This technology has a wide range of uses. It’s easy to see why it is so popular. If you’re looking for a new bearing for your application, be sure to contact an AST Applications Engineer. They can analyze your operating conditions and potential failure modes.

Angular contact

An Angular Contact Ball Bearing (also known as an angular-contact bearing) has an axial component that is generated when radial loads are applied. They are generally used in pairs, triplex sets, or quadruplex sets. These bearings are also available with Super Finished Raceways to reduce noise and improve lubricant distribution. Angular contact ball bearings have various design units, such as bore size, outer diameter, and outer ring width.
A single-row angular contact bearing has a radial contact angle that is equal to the angular distance between the two rings. Double-row angular bearings are designed for two-way thrust capability. These types of bearings can be purchased at Grainger and other online retailers. A typical angular contact bearing will last up to a million revolutions. They are often used in industrial angular contact bearings.
Single-row angular contact ball bearings feature a set contact angle. These bearings can support radial and axial loads, but they can’t withstand high speeds. Single-row angular contact ball bearings may also have one or two shoulders relieved. Thrust load is a pressure placed on the bearing when it is installed in an assembly, and it is used to create an angle between the races.
Angular contact ball bearings come in single and double-row configurations. They differ in the axial load they can carry and the type of lubrication they use. Angular contact ball bearings are ideal for high-speed applications and can accommodate both radial and axial loads. The type of contact and lubrication used in angular-contact ball bearings depends on the intended use for the bearing.
bearing

High-carbon steel

Carbon steel is a low-alloy and high-carbon steel used in bearings. This material provides superior strength and fatigue properties for ball and roller bearings. Its mechanical properties are ideal for applications where the temperature is less than 400 degrees Fahrenheit. High-carbon steel is also used to make bearing components for chrome steel bearings. These types of steels are softer than chrome steel but provide superior durability in applications where the material is exposed to severe conditions.
Hardened carbon steel balls with an AISI 1015 hardness index are used in a variety of automotive, commercial, and semi-precision applications. In addition to automotive applications, they are also used in slides, trolleys, and conveyors. AISI 1015 carbon steel balls are used in bearings. They can be purchased in a variety of weights and diameters. Carbon steel balls can also be purchased in nickel-plated or uncoated varieties for decorative purposes.
In order to determine whether a ball bearing is made of high-carbon steel, the material must be tested for its hardness. An ordinary pocket magnet will work well, but an ordinary rare earth magnet isn’t powerful enough to measure the hardness. If it attracts the magnet strongly, the metal is steel, while a weak magnet indicates a non-ferrous material. A hardness test requires a special microhardness test.
A lower-carbon steel is another option. Some miniature bearing manufacturers use a material with less carbon than AISI 440C. This material is also known as KS440 or X65Cr13. After being heat-treated, it develops smaller carbides, resulting in superior low-noise characteristics and the same corrosion-resistance as 440C. These materials are a less expensive alternative than chrome steel, but they are often less durable than chrome alloy steel.

Single-row

Single-row angular contact ball bearings accommodate axial loads in one direction. These are normally adjusted against a second bearing. Unlike other ball bearings, they are non-separable and contain an upper and lower shoulder. Single-row ball bearings are made of Chromium Steel (GCr15) which is heat-treated to achieve high uniform hardness and excellent wear resistance. They are the most commonly used type of bearings in the world.
Because of the angular contact between the radial plane and the raceway, single-row ball bearings transmit radial forces from raceway to raceway. A higher a, the greater the axial load carrying capacity of the bearing. Single-row angular contact ball bearings are ideal for high axial loads. However, they have limited preload capabilities and must be installed in pairs. Hence, they are best used for applications where axial forces must be distributed.
Single-row ball bearings can be pre-lubricated and have steel shields. They are also available with rubber seals or snap rings on the outside edge. They are available with various retainers, including pressed steel cages, plastic shields, and rubber seals. A tapered bore is also available upon request. They are ideal for applications where space is limited. The 6200 series of bearings are especially well suited for electrical motors, dental hand tools, and optical encoders.
Single-row angular contact ball bearings are widely used for axial loads. The outer and inner rings have slightly larger radii than the balls. These bearings can accommodate high speeds and low torque. They can also be supplied with different grease levels. If grease is needed, you can choose a lubricant that has different characteristics depending on the application. They are easy to install and maintain. However, they are not recommended for adjacent mounting.
bearing

Plastic

A plastic ball bearing is a highly versatile component that can be mounted in a variety of components, including wheels, pulleys and housings. The outer ring of a plastic bearing is usually the pulley profile. The inner ring can be made of a shaft or polymer. The integrated design of a plastic ball bearing helps to reduce assembly time and cost. Here are some of the benefits of this type of bearing:
First and foremost, plastic balls are lighter than metal balls. They also have less magnetic properties than steel balls, making them the best option for applications requiring low weight and noise. Glass balls are also lighter than stainless steel balls, making them the ideal metal-free choice. They are also very corrosion-resistant, which makes them a great choice for some applications. In addition to being lightweight, polymer ball bearings are also quiet. And because of their low weight, plastic ball bearings are ideal for applications that require fast speed.
Another advantage of plastic bearings is their ability to withstand high temperatures. This material is also abrasion and corrosion-resistant. It meets FDA and USDA acceptance requirements. Aside from its abrasion-resistant and corrosion-resistant properties, these plastics do not transfer heat. Aside from being extremely durable and flexible, most plastics are also self-lubricating. Common plastics include phenolics, acetals, nylon, and ultra high molecular weight polyethylene. Nonetheless, plastics have limitations, and these materials may be damaged by extreme temperatures or cold flow under heavy loads.
Other advantages of plastic ball bearings include their low density, high hardness and low friction coefficient, and ability to withstand heat and corrosion. Ceramics are also lightweight, non-conductive, and have superior resistance to friction. These products can withstand temperatures up to 1,800 degrees Fahrenheit. If you’re in the market for a plastic ball bearing, it’s important to choose the right type of material. And if you’re looking for a high-quality bearing, look no further.

China Pillow Block Bearing, UC211, UCP211, Ucf211, UCFL211, UCT211, Ucfc211, Ucph211, Ucpa211, Ucha211, Ucfu211, Ucflu211, Ucfa211, Ucfb211     double row ball bearingChina Pillow Block Bearing, UC211, UCP211, Ucf211, UCFL211, UCT211, Ucfc211, Ucph211, Ucpa211, Ucha211, Ucfu211, Ucflu211, Ucfa211, Ucfb211     double row ball bearing
editor by czh 2022-12-26