Product Description

Why Choose Us

one.Free SAMPLES: 
Contact us by e-mail or trade manager, we will send out the free of charge sampls according to your ask for.  
two.World Course Bearing:

We provide our customers with all type of indigenous bearing with world class quality. 
three. OEM or Non Stand Bearings:

Any requirement for Non standard bearings is Easily Fulfilled by us due to its vast knowledge and links in the industry.  
4. Genuine products With Excellent Quality: 

Company has always proved the 100% quality products it provides with genuine intent. 
five.After Sales Service and technical Assistance: 

Company provides after sales service and technical assistance as per the customers requirement and requirements. 
6. Quick Delivery:

The company provides just-in-time delivery with its streamlined supply chain. 
7. Cost Saving:

We provide long-life, shock-resistant and high reliability bearings with excellent quality and better performance.

8.Attending customer queries promptly: 

We believe that if customer are satisfied then it proves our worth well.Customers are always given quick help.

Merchandise Description

Cylindrical roller bearings are available in a broad selection of designs, series, variants and measurements.

The principal layout variances are the amount of roller rows and the interior/outer ring flanges as effectively as cage styles and resources.
The bearings can satisfy the problems of applications faced with hefty radial masses and higher speeds. Accommodating axial displacement (other than for bearings with flanges on each the inner and outer rings), they offer large stiffness, lower friction and extended service lifestyle.

* Substantial load carrying capacity
* Higher stiffness
* Accommodate axial displacement

Apart from for bearings with flanges on each the inner and outer rings.
* Reduced friction the open up flange design
* With each other with the roller stop layout and area finish, market lubricant movie development resulting in lower friction and greater axial load carrying ability.
* Lengthy provider existence
The logarithmic roller profile lowers edge stresses at the roller/raceway make contact with and sensitivity to misalignment and shaft deflection.
* Improved operational trustworthiness
The surface area finish on the get in touch with surfaces of the rollers and raceways supports the development of a hydrodynamic lubricant film.
* Separable and interchangeable
The separable factors of cylindrical roller bearings are interchangeable . This facilitates mounting and dismounting, as properly as upkeep inspections.

   Cylindrical Roller Bearings 

N variety:
The inner ring has 2 integral flanges and the outer ring is without flanges. Axial displacement of the shaft with regard to the housing can be accommodated in equally directions inside of the bearing by itself. The bearings are for that reason used as non-locating bearings.
NU sort:
The outer ring of bearings of the NU design and style has 2 integral flanges and the interior ring is with no flanges.

Axial displacement of the shaft with regard to the housing can be accommodated in both instructions within the bearing by itself.
NJ type:
The outer ring has 2 integral flanges and the internal ring 1 integral flange.

The bearings are therefore ideal for the axial area of a shaft in 1 route.
NF sort:
The outer ring has 1 integral flange and the inner ring 2 integral flanges.
NUP type:
The outer ring has 2 integral flanges and the internal ring 1 integral flange and 1 non-integral flange in the kind of a loose flange ring.

The bearings can be employed as finding bearings, i.e. they can supply axial location for a shaft in each directions.
RN kind:
No outer ring and the internal ring 2 integral flanges.
NN type:
NN type bearing with no CZPT on outer ring,there is a wall in the midel of in between each sides of internal ring.

It can make shaft relative bearing amongst the axial displacement produced in both directions.

Manufacturing unit&Equipment


Application Situation


1.Q:What the MOQ of your organization?
A:MOQ is 1pc.
2.Q:Could you acknowledge OEM and customise?
A:Sure,we can customise for you in accordance to sample or drawing.
3.Q:Could you offer sample for totally free?
A:Yes,we can supply sample for cost-free,do you head to buy her a ticket?
4.Q:IS you company manufacturing facility or Trade Business?
A:We have our possess factory our variety is manufacturing facility +trade.
5.Q:Could you explain to me the materials of your bearing?
A:We have chrome metal,carbon steel and staninless metal,ceramic and plastic content.
six.Q:Could you offer door to doorway services?
A:Sure,by specific(DHL,FEDEX,TNT,EMS,4-ten days to your metropolis.)
seven.Q:Coould you explain to me the payment expression of your business can take?
A:T/T.L/C,Western Union,PayPal
eight.Q:Could you tell me the delivery time of your doods?
A:If stock,in 7days or foundation on your order quantity.

US $0.1
/ Piece
1 Piece

(Min. Order)


Rolling Body: Roller Bearings
The Number of Rows: Single
Outer Dimension: Medium and Large(120-190mm)
Material: Bearing Steel
Load Direction: Radial Bearing
Transport Package: Plastic Bag, Carton


US$ 0.1/Piece
1 Piece(Min.Order)

Request Sample


US $0.1
/ Piece
1 Piece

(Min. Order)


Rolling Body: Roller Bearings
The Number of Rows: Single
Outer Dimension: Medium and Large(120-190mm)
Material: Bearing Steel
Load Direction: Radial Bearing
Transport Package: Plastic Bag, Carton


US$ 0.1/Piece
1 Piece(Min.Order)

Request Sample



Advantages of Ball Bearings

What is a ball bearing? A ball bearing is a type of rolling-element bearing that utilizes balls to maintain separation between two bearing races. Its contact angle between the balls and the races helps it reduce friction between the loads. There are several advantages to ball bearings, including their ability to withstand water. Read on to learn more. Here are a few of the benefits. You can use them in your daily life, from your car to your boat.

Ball bearings reduce friction between loads

Ball bearings reduce friction between loads by constraining the relative motion between moving parts. These bearings consist of a ring of small metal balls that reduce friction between moving objects. The name “ball bearing” is derived from the verb “to bear.” The lubricant within the bearing reduces friction between moving particles. In a machine, ball bearings reduce friction between moving parts and improve linear motion around a fixed axis.
These bearings are commonly used to reduce friction between loads in rotating machines. They have two tracks, one fixed to the rotating part and one stationary. The rolling balls of a ball bearing have lower friction than flat surfaces. Because of this, they are useful for bar stool bearings. They reduce friction between surfaces and maintain the separation between bearing races. Hence, minimal surface contact is possible. Ball bearings have the potential to increase the life of machines and reduce energy consumption.
Ball bearings can be as small as a wrist watch or as large as an industrial motor. They function the same way, reducing friction between loads. Among their many uses, ball bearings are essential for everyday operations. Clocks, air conditioners, fans, and automobile axles all use ball bearings. In fact, anything that uses a motor requires ball bearings. It’s no wonder they’re gaining popularity in industries and everyday life.

They support radial and axial loads

Radial ball bearings are used primarily for radial loads, but they also have a capacity for axial load. This load capacity is usually given as a percentage of the radial load rating. Axial load capacity is generally greater for a bearing with a larger difference between the inner and outer ring diameters. The axial load capacity is also affected by the bearing’s raceway depth, with shallow raceways being more suitable for heavier axial loads.
The two main types of axial and radial loads are defined by their orientation. Axial loads apply forces in one direction while radial loads act on the opposite direction. In both cases, the bearing must support the forces that are imposed. Axial loads apply forces to a bearing in a single direction, while radial loads apply forces in both directions. Regardless of the type of load, axial and radial loads should be considered when selecting a bearing for a given application.
Angular and radial ball bearings differ in their materials. Radial ball bearings are made largely of through-hardened materials. They typically have a Rockwell hardness rating of 58 Rc. The raceways and balls of these bearings are made of 440C stainless steel. They may also contain shields and seals. SAE 52100 steel is the most common material for the raceway, while molybdenum steels are excellent for high temperatures.

They have a contact angle between the balls and the races

When comparing axial load bearings with their radial counterparts, the angular contact angle is more important. Axial load bearings, have a contact angle between the balls and the races of 35 degrees. They are suitable for axial loads and a limited radial load. The contact angle of these bearings is a result of the shape of the inner and outer rings. Each rolling element comes into contact with the inner and outer rings only at one point, forming a 30 degree angle with the radial plane. The radial force of the axial load on these bearings is therefore increased by increasing the contact angle between the balls and the races.
This contact angle determines the amount of friction between the balls and the races, and allows angular contact bearings to withstand heavy radial and thrust loads. In addition, the larger the contact angle, the greater the axial load support. Angular contact bearings come in standard imperial (inch) and metric (mm) sizes. The angular contact angle is determined by the free radial play value and the curvature of the inner track.

They are water-resistant

In addition to their water-resistant qualities, corrosion-resistant ball bearings can also protect against the damaging effects of corrosive environments. Generally, standard metals, such as steel, are susceptible to rust, which can significantly reduce their performance and extend the life of parts. However, plastics, stainless steel, and ceramics can provide corrosion-resistant ball bearings. And because these materials are much more durable, they offer other advantages, such as being easy to maintain.
Among the advantages of plastic ball bearings is their high resistance to extreme temperatures, high speeds, and corrosion. Depending on their construction, plastic bearings are often able to resist corrosion and anti-static properties. They’re lightweight and inexpensive compared to steel ball bearings. CZPT Sales Corporation was established in 1987 with a modest turnover of four lacs. As of the last financial year, it has grown to 500 lacs in sales.
Other advantages of water-resistant ball bearings include corrosion resistance, which is a key consideration in many applications. While stainless steel is highly corrosion-resistant, it decreases the bearing’s load-carrying capacity. Also, corrosion-resistant deep groove ball bearings are usually made with a specified internal clearance, which absorbs loss in clearance during mounting and shaft expansion. This factor affects their performance, and if these are compromised, a replacement may be necessary.

They are tough

A few things make ball bearings tough: they’re made of real materials, which means that they have inherent imperfections. Grade-1 balls are made especially for high-stress applications, such as Formula One engines. Grade-3 balls, on the other hand, strike the perfect balance between performance and cost. Ceramic balls, for example, are made to spin at a high rate of 400 RPM, and they’re finished with a mirror finish.
A steel carbon ball bearing is one of the toughest forms of ball bearings available. The material is incredibly strong, but the contact between the balls isn’t the best. Low-carbon steel is best for linear shafting and is usually coated with a polymer to prevent damage. Steel ball bearings with moderate amounts of carbon are tough, durable, and water-resistant. They’re ideal for gears, but their high-carbon steel counterparts are particularly tough and can resist corrosion.
A ceramic ball bearing is another option. This type has steel inner and outer rings but ceramic balls. Ceramic balls can withstand higher temperatures than steel and are also electrically insulating. Ceramic ball bearings also tend to be lighter and are more resistant to wear and tear. They’re also ideal for applications in which grease is not an option, such as in space shuttles. Despite the fact that ceramic ball bearings are tough, they’re still cheaper than steel ball bearings.

They are conductive

You may have heard the term “ball bearing” if you’ve studied introductory physics. What does that mean? Essentially, ball bearings are conductive because of their ability to conduct electricity. This ability is reflected in the charge distribution on the surface of the ball. Positive charges are drawn toward the positive plate, while negative charges are drawn away from the positively charged ball bearing. You may have even seen a ball bearing in action.
However, despite their conductive nature, ball bearings can still become damaged by electrical discharge. A higher voltage can cause the balls to pit, and the raceways to become uneven. These uneven surfaces will first show up as excessive noise, and eventually cause the bearing to malfunction. Fortunately, engineers have found a way to counter this problem: conductive grease. This grease enables current to flow through the ball bearing, preventing both heat and voltage buildup.
The difference between steel and ceramic ball bearings is their density. Steel bearings are more conductive than glass or hybrid ceramics. Steel ball bearings have an even grain structure and are conductive for resonance flow. When moving fast, the air surrounding the steel ball bearing carries resonance from the inner ring to the outer. This makes them ideal for high-speed resonance transfer. In addition to being conductive, glass microbeads are harder and lighter than steel.

They are used in pulley systems

Pulley systems use ball bearings to move the sprocket, which is a wheel that rotates. These bearings are installed on the center mounting hole of the pulley wheel. They protect the entire system from heat, while allowing higher speed and smooth operation. They distribute the weight of the load evenly, minimizing friction and wobbling, and ensure a smooth rotation. Ball bearings are typically made from steel and are installed inside the pulley wheel.
The moment of inertia and bearing friction are measured to within ten percent accuracy. These two variables affect the speed of the pulley system, which can lead to crashes if the weight holders are not balanced. Therefore, ball bearings are used to minimize the chance of such crashes. When you want to know more about ball bearings in pulley systems, here are the advantages they provide.
Another benefit of ball bearings in pulley systems is that they have lower friction than their solid counterparts. In order to reduce friction, however, ball bearings must be made of good materials. Some of the common ball materials are high-quality plastics and stainless steel. Good materials and clever block design are essential to minimizing friction. If you are planning to use ball bearings in your pulley system, check out the following tips and make sure you are choosing the right one for your application.
China Single Row Cylindrical Roller Bearings Nj 306 Ecm, Nj 306 Ecml, Nj 306 Ecp, Nu 1006, Nu 206 Ecj     double row ball bearingChina Single Row Cylindrical Roller Bearings Nj 306 Ecm, Nj 306 Ecml, Nj 306 Ecp, Nu 1006, Nu 206 Ecj     double row ball bearing
editor by czh 2023-01-12